TA8H 配置

Follow the steps to create a simple Access Point

Notice?TA8H is working as a bridge which is default value. External DHCP and routing server is needed

Step 1. Network configuration

Change IP Address of Your device in Network page:

lastmile_indoor_ap_ configuration_2

Step 2. Configure Wireless setting for 2.4GHz AP
  • Select your Country Code
  • Define SSID
  • Choose the least occupied Frequency MHz
  • Select Channel Width
  • Enable Security if necessary

lastmile_indoor_ap_ configuration_3

Step 3. Configure Wireless setting for 5GHz AP
  • Select your Country Code
  • Define SSID
  • Choose the least occupied Frequency MHz
  • ChooseIEEE 802.11 Mode:
    1. A/N mixedif you use11nand legacy stations
    2. 11AC/11ANmixed if you use 11ac,802.11nand legacy stations
    3. 11AC only if you use 802.11ac stations
  • Select Channel Width
  • Enable Security if necessary
  • Disable TDMA Enable in TDMA page
  • All other settings leave as default

Notice: When using TDMA mode, the TDMA button need to be enabled at both AP and station devices in the web-based configuration menu. The devices from other vendors cannot be connected to TA8H in the TDMA mode.

lastmile_indoor_ap_ configuration_1

The Status page displays a summary of status information of thedevice. It shows information like Wireless Mode, Frequency/Channel, Network Mode and so on.

lastmile_indoor_ap_ configuration_4

 

Related Articles