Last Mile | Installation Recommendations

.Link stability and throughput improvement in noisy environment

When a link does not work well, there are several options that you can try.

1. Set the Channel width to the lowest available value.

2. Change Frequency MHz to other value.

3. If RSSI of STA is more than 60?please set Output Power to Middle or Low.

All above can be done in 2G Wireless/5G Wireless page on AP device.

installation_1

. The attention point of setting multiple 5G Station in long distance

Setting multiple 5G Station in long distance, there are several options that you must notice.

1. Enable TDMA Enable in TDMA Settings page on AP device.

2. Enable Station Isolation in 5G Wireless page on AP device.

3. Enable Auto ACK-Timeout Adjust in Advanced page on AP and Station device.

4. Recommended to enable Frequency Scan List in 5G Wireless page on Station device.

installation_2

installation_3

installation_4

installation_7