Elevator Wireless Monitoring Configuration

TB2I(T) Configuration

Follow the steps to create a Access Point(WDS) device

Step 1. Network-Interfaces configuration

Open Network-Interfaces page and click Edit:

TB2I_T_1

  • Change IPv4 address in Interfaces – LAN page

TB2I_T_5

Step 2. Configure Wireless setting for TB2I(T)

Open Network-Interfaces page and click Edit:

TB2I_T_2

  • Define ESSID

TB2I_T_6

  • Enable Encryption if necessary

TB2I_T_4

  • Choose the least occupied Channel
  • Select HT mode

TB2I_T_7

  • Select your Country in Advanced Settings page

TB2I_T_3

  • All other settings leave as default

 

TB2I(R) Configuration

Follow the steps to create a Client(WDS) device

Step 1. Network-Interfaces configuration

Open Network-Interfaces page and click Edit:

TB2I_R_1

  • Change IPv4 address in Interfaces – LAN page

TB2I_R_5

Step 2. Configure Wireless setting for TB2I(R)

Open Network-Interfaces page and click Edit:

TB2I_R_2

  • Define ESSID

TB2I_R_6

  • Enable Encryption if necessary

TB2I_R_4

  • Select your Country in Advanced Settings page

TB2I_R_3

  • All other settings leave as default

The Status-Overview page displays a summary of status information of the device. It shows information like Mode, Channel and so on.