Backhaul | Point to Point

PTP_backhaul

Access Point device configuration

Configure the Wireless Mode to act as Access Point in 5GWireless page. Change IP Address of Your device in Network page:

backhaul_PTP_2

Configure Access Point device wireless section:

  • Select your Country Code
  • Define SSID
  • Choose the least occupied Frequency MHz
  • Select Channel Width
  • Enable Security if necessary
  • All other settings leave as default

backhaul_PTP_1

Station device configuration

Configure the Wireless Mode to act as Station in 5GWireless page. Change IP Address of Your device in Network page:

backhaul_PTP_2

Configure according to the Access Point:

  • Select your Country Code
  • Define SSID
  • Select Channel Width
  • Enable Security if necessary
  • Enable Frequency Scan List if necessary
  • All other settings leave as default

backhaul_PTP_3

Check signal levels

For optimum signal level define the transmit power

  • Local signal received signal strength from remote device (Access Point in this case)

backhaul_PTP_5

  • Remote signal received signal strength from local device (Station in this case)

backhaul_PTP_4